About Our ABBON3PM SX

 
 

Non-Radioactive technology improves Data accuracy and Data reliability

ABBON’s non-radioactive TWINFLOW™ Technology provides much more than clients would expect. ABBON’s Non-radioactive meter improves measurement reliability since ABBON3PM accuracy is not affected by H2S or CO2 content, unlike radioactive meters that suffer from high attenuation of gamma radiation by Sulfur and Carbon Dioxide.

Neither will salts dissolved in water affect ABBON3PM’s water cut measurement, unlike radioactive meters, since gamma absorption coefficients are also depending on salinity. This increases measurement accuracy, data assurance and reduces OPEX significantly, since re-calibration in the field is not necessary.

TWINFLOW™ Technology provides a unique sensor design

TWINFLOW™ Technology ensures excellent signal and data quality of the impedance sensors. The sensors are ideally placed in the Twin Venturi throat, co-located with the DP measurement, to enable a real time “on the spot” measurement. The TWINFLOW™ design provides “built in” flow conditioning, by reducing slip and swirl.

Combining the high signal quality of the sensors with our proprietary high-performance electronics & software offers extraordinary performance in non-radioactive meter design.

ABBON’s unique and patented TWINFLOW™ Technology for reliable and safe Multiphase Flow Measurement increases production output and reduces costs.

The metering section with TWINFLOW™ technology is a spool section with an inner cross-section fit to the flow rates at the location. The principle of operation is a combination of the following technologies:

  • Impedance readings from electrodes mounted in the measurement chambers.

  • Differential pressure measurement between a location upstream of the chamber and a location inside the chamber.

  • Velocity calculations from cross correlation of the time varying impedance signals.

  • Fluid pressure and temperature measurements.

  • A universal interpretation model that combines the above parameters to calculate the individual volume flow rates of oil, water and gas.

The absolute pressure inside the meter and the differential pressure between a position upstream and a position inside the measurement chambers are measured by a multivariable transmitter. The temperature is measured by an RTD connected to detection circuitry on the Front-End electronics board. The meter body- and electrode materials are selected based on the operator’s pipe specifications, e.g., Duplex or Alloy 625. The insulating material is PEEK, a high-performance thermoplastic.

About ABBONAnalyticS™ End-to-End Real Time Data Solutions

ABBONAnalyticS™ is an End-to-End Real Time Data Solution with ABBON Multiphase Flow Metering systems. ABBONAnalyticS™ provides on demand secure access to historical and real time flow metering data to operators across the globe. Customers and operators monitor the status and configure remotely the Non-Radioactive MPFM using ABBONAnalyticS™; they additionally receive automated notifications when the status of the Non-Radioactive MPFM’s health check changes based on customer-defined alerts.

Independent Data Storage and Computing via Cloud. ABBON AnalyticS™ Real Time Data Management can be deployed either on the customer’s premises or on public cloud infrastructure. This ensures the highest flexibility and data security according to our customers’ individual policies.

 
 

About ABBONCareS™ End-to-End Real Time Data Solutions

ABBONCareS™ offers tailored, innovative and comprehensive service solutions for seamlessly supporting the different phases of the Life Cycle of your Meter Installations. From successful installation and commissioning for start up, maintenance and support during operation, as well as Metering & Rental Services for operation of our Non-Radioactive ABBON3PM metering systems in production.

Reduce OPEX with ABBONCareS™ CBM and PPM. ABBONCareS™ technical experts and certified field engineers ensure local support to our customers at any time during operation. Customized service packages from ABBONCareS optimizes your maintenance strategies to unlock operational efficiency across your installed base. High data assurance and optimized metering performance with Periodic Preventive Maintenance (PPM) and Condition Based Maintenance (CBM) supported by ABBONCareS™. Onsite Services and ABBONAnalyticS™ Remote Solutions.

Reduce CAPEX with ABBONCareS™ metering services & rental. With equipment rental, ABBONCareS™ technical experts operate and service the Non-Radioactive ABBON3PM metering system during the whole well testing and well monitoring process.

With ABBONCareS™ Service Solutions ‘Rent & Operate (R&O)’ and ‘Buy & Operate (B&O)’, ABBONCareS™ takes the full responsibility of operating the metering system to provide flow data and analysis to enable data-driven decisions, onsite as well as remotely.

 
 

More great benefits of the ABBON3PM™ MPFM Solutions

One further benefit of the ABBON meter in contrast with its competitors is its much smaller size. ABBON’s meter can be moved, along with its skid, in the bed of a pickup truck, whereas each traditional meter requires a truck and trailer or multiple trailers to move it. ABBON’s meter requires only one operator, whereas a traditional meter requires 3 or more operators. The ABBON3PM™ meter being non-radioactive eliminates potential radiation hazards to people and to the environment; avoids wipe tests, source handling, and source disposal; and greatly reduces OPEX for HSE and safety measures. In this way, the ABBON non-radioactive multiphase flow meter is a green technology. Even its small size in itself, along with the ease of its transportation, helps reduce the operator’s environment footprint.